China manufacturer of magnetic ballasts for metal halide flood lights & hps flood lights

In the market, more and more kinds of indoor lighting, consumers choose the lighting fixtures, it seem simple, so easy to future cleaning and maintenance, but also buyer will choose some of the more complex lighting, that looks more beautiful. Or in order to collocation interior decoration style, had to choose a more complex lighting. No matter what style you choose, we will have to do the cleaning and maintenance of the lighting in order to extend their life.

A), buy Lamps, the first not to busy to install, should carefully read the marker lamps and read the installation instructions, according to the provisions of the manual installation, use the lamps and lanterns, otherwise there is potentially dangerous.Timely replacement of lamp, to prevent the emergence of the light ballast burn insecurity

b), according to the signs of source parameters timely replacement of aging of the lamp, lamp at both ends of the red and black of the lamp tube or shadow, a lamp tube jump is not bright.

C), in the cleaning and maintenance should be careful not to change the lamp structure, also don't literally replacing the lamp parts, cleaning and maintenance after the end should be according to the sample luminaire shall be installed, do not drain installation, mistaken installation lamp parts;

D), lamps fitting in the use of the need to strengthen the maintenance, in order to extend the service life. Room lamp must often wipe with a dry cloth, and pay attention to prevent moisture intrusion. In order to avoid a long time appear corrosion damage or leakage short-circuit phenomenon; installed in the toilet and bathroom lights shall be fitted with a waterproof lampshade, otherwise will greatly shorten the service life; installed in the kitchen light should pay special attention to the oil and smoke, because the accumulation of grease will affect the lamp illumination; light colored translucent shade is good, but easy to stick ash, diligent cleaning, so as not to affect the light transmittance; luminaires if non metal, can use wet cloth to wipe, lest dust accumulation hinder lighting effects;

E), use the lamps and lanterns try not to frequent switch, because the lamps and lanterns at the instant of frequent starting, current through the filament is greater than that of the normal work when the currents, making the filament temperature increased sharply accelerated sublimation, which will greatly reduce the service life, so to minimize the light switch need to pay special attention to the:Moisture easily lead to rust, paint, but also shorten the use of lamps. Therefore, moisture is the key to lighting maintenance, especially bathrooms, bathroom fixtures and kitchen stove headlights, to installation moistureproof lamp shade, to prevent moisture intrusion, avoid corrosion damage or leakage short-circuit lighting is used for a period of time, a lot of dust and need our cleaning.