China manufacturer of magnetic ballasts for metal halide flood lights & hps flood lights

Residential lighting should be chosen based LED lamps, rare earth fluorescent lamps lighting source.
Residential lighting design should be practical and comfortable indoor light environment. Bedrooms and a restaurant should adopt a low color temperature of the light source.
Living room lighting should consider the requirements of multi-purpose use, such as the setting of general lighting, decorative lighting, floor lamps, dimming device can sometimes set in the living room, to meet the needs of different functions.
Restaurant local lighting hanging lamps highlight the effect of the table, while also setting the general lighting, the entire room with a certain degree of brightness, and display a sense of cleanliness.
Kitchen fixtures easy to clean type should be used, such as glass or enamel products, the lampshade together with the moisture-proof lamps mouth, and remarkable the colors nature of identical or approximate lighting source should be used with the restaurant.
The foyer is into the interior gives the initial impression of the place, so bright lamps position to consider the placement of the junction at the entrance and in-depth indoor, this can be avoided in the face of the respondents shadow.
Cabinet or wall located in the foyer lights, make a broad sense within the hall.
Corridor lighting should be placed at the entrance of the room, closet, especially stairs started and directional position. Set chandeliers make the lighting when the lower end from the ground 1.9M. The staircase lighting should be bright, to avoid the danger.
The toilet need bright, soft light, bathroom lighting switch frequently, it is more appropriate to use LED light source.
The bathroom fixtures position should be avoided above behind the toilet or bathtub. Switch such as Rocker plate should be established on the bathroom door, otherwise it should be used moistureproof waterproof panel or insulation rope pull switch operation.
The toilet lighting should be installed in the toilet before the top.
Cloth lamp and power outlet can be separated residential units (apartments) set, should adapt to changes in light wall arbitrary separated. Socket can be set in the ceiling hanging, decorative multifunctional trunking, or a combination of lighting, as well as pieces of electrical installations and furniture, wall.
The senior residential (apartment) in the party hall channel and toilet should be used with Rocker plate light switch.
Prevention and has a monitor, its function should be linkage unit within the channel lights and bells.
Apartment staircase lights with the floor layers show that the combination of public lighting in the management room centralized control. And high-rise residential staircase light timer switch, such as the selection should be limited flow and, in the case of accident cast-to-point high state.
General household lighting and socket should be separate wiring, and in addition to the branch back on the road in the household equipped with overload, short circuit protection, and should be installed in the socket circuit leakage protection and under-voltage protection function fluorescentballasts.