China manufacturer of magnetic ballasts for metal halide flood lights & hps flood lights

[2015-07-04]

Almost all the customers buy the lamps will be consulting the installation, always worried about whether the package installation, if the service there is no way to install the how to do, the commonly used lamps and lanterns are crystal lamp, crystal pendant, fluorescent light fixture, marble lamps, we are dedicated to the to according to the different kinds of home lighting installation, chandeliers, ceiling lamps, wall lamps, has its own installation method to everybody as below: (一) installation requirements: 1 lamps and accessories should be complete, there should be no mechanical damage, deformation, paint peeling and lamp cover rupture and other defects 2 the load carrying capacity of the fixed part of the wall mounted ceiling mounted light fixture shall be matched with the weight of the lamp 3 the lamp should be equipped with hanging line box, each hanging line box can only be installed a set of pendant lamp. The surface of the pendant lamp must be well insulated, and there may not be a joint, and the wire cross section shall not be less than 0.4 mm. In the wiring box hanging line should be taken to prevent thrum stress the lamp drop measures. Weighed more than a kilogram of lamps should be arranged chain. When the chandelier lamp weight more than 3 kg, should use the embedded hook or a bolt fixed. The chain lamp line should not be subject to tension, and the lamp wire should be compiled with fork chain 4 the incandescent lamp as the light source of ceiling lamp can not be installed directly on the flammable component; lighting shall be close to the lampshade; when the lighting and insulation between the distance less than 5 mm, lighting and insulation between Taiwan should take heat insulation measures. The power of an incandescent lamp shall not exceed the maximum power allowed by the lamp. 5 fluorescent lamp as the light source, ballast should be installed in the phase, the lamp should prevent lamp foot off shell and stay in the lamp box internal margin, giant lights and the frame of the roof decorative lines are parallel, the lamp frame should be close to the roof surface 6 Light socket should be grounded in the center contact terminals, zero line should be grounded on the thread of the terminal, lamp holder of the insulated shell should be complete, no damage and leakage phenomenon 7 fixed lantern hook, its diameter should not be less than the diameter of the lamp and the lamp hanger, a minimum of not less than 6 mm...

[2015-07-04]

How to install the T8 LED tube? Due to the current LED lights gradually in the market spread, and T8 LED tube and traditional fluorescent lamp tube is not the same power supply, to care for the majority of the products consumers. Clear the lamp installation. Today, specifically the personal experience of sorting out, hope all of you help now led lamp basically are built in power supply, so basically is to replace the existing fluorescent lamp mainly, and with traditional fluorescent lamps and two kinds: magnetic fluorescent lamp, electronic fluorescent lamp....

[2015-07-04]

Compared to the built-in high-quality electronic ballast and magnetic ballast, electronic ballast has the advantages of energy saving, no stroboscopic start, low noise, and the service life of the lamp tube is prolonged by 50%. The electronic ballast of the Gray T5 converter is arranged in the replacement line, and the harmonic content and the electromagnetic interference (EMI) are in line with the requirements of the national standard. Energy consumption level reached A2 level. Preheat start function, prolong the service life of T5 lamp. Active filter circuit. Abnormal state protection function, security is guaranteed....

[2015-07-03]

Children lively nature, active, and of things full strong curiosity, especially young children, but they lack the necessary self-protection awareness. Therefore, if the installation of small master's room wall lamp, it would have to be careful not to let the power cord exposed, lest innocent little master with wire when playing with toys, thus causing electric shock hazard. Also, parents can also for the beloved baby to install wall type adjustable optical switch, which can facilitate children at night switch lamp socket should cover. For young parents, home naughty baby often amused everyone laugh from ear to ear, but the child born love to climb the personality, so you must pay attention to the children's room if the power socket is safe. General power supply socket is no cover. Therefore, you have to for the sake of the safety of the baby, with a choice of insurance cover, or unplug the power plug hole can automatically close the socket children room lighting should be consistent with the child's personality health baby space...

[2015-07-03]

Chandelier lighting in the process of cleaning, such as the replacement of light bulbs, the proposed selection of good quality, long life of brand-name products, crystal lamp for light bulbs, need to pay attention to the following: 1, regular inspection: hanging lamp in an important position or place more People are hurrying to and fro. its security, stability should be the first. The headlights often weigh several hundred kilograms, in case of corruption, the consequences be unbearable to contemplate. So, we should regularly sent checks used in the smallpox embedded parts and bearing hook, chain, prevent aging and undetected, lead to an accident. 2, timely updates: possible, should be checked at the same time, the performance of the wire is intact, and found sticky, aging, that is to change, to ensure safety 3, professional maintenance: a large lamp circuit complexity (grading unlit), it is best to hire a lighting company of professional and technical personnel for cleaning, maintenance, and the expense is not much, easy to repair and is safe and reliable...

[2015-07-02]

The usage of an electronic ballast started out to come to be preferred inside the early to mid 1990's. Given that then, they've continued to gain a growing market share when in contrast towards the metal halide ballast. The driving force behind this shift was primary as a consequence of efficiency. The magnetic ballast was deemed to lead to a substantial level of vitality loss, thus making it less energy productive. An electronic ballast primarily serves two functions. To start with, it is going to deliver the leap get started essential to acquire a light bulb going. Second, it is going to limit the quantity of latest to whatever the tube you're using needs. Though the ballast can preserve several different distinctive wattages, diameters, and lengths, it's normally helpful to maintain its purely natural design and style as near to these as you possibly can. The large modify that was introduced with all the electronic ballast what that it utilized a higher frequency inverter that allowed a straightforward switching of power supplies which was formerly achieved through the use of an iron ballast or magnetic ballast. All round, this sort of ballast is regarded as to have a larger initial construction expense than other types, however they compensate with long-term savings from their enhanced power efficiency....

[2015-07-02]

High intensity Discharge lights function incredibly in hydroponic applications. the HID lamps deliver light-weight that mimics sunlight much more intently than gentle produced by other light bulbs, nevertheless it does so employing a lot less strength and in a way that extends the daily life from the expand lamps. Any sort of HID lamps you select to utilize for hydroponic gardening will require a lamp ballast. There are actually a few standard forms of ballasts accessible for lamps employed in a hydroponic garden: magnetic, electronic, and digital ballasts. Digital ballasts are top-quality to magnetic ballasts for numerous good reasons. A magnetic ballast is required to manage the electrical latest that flows by the HID lamp. The ballast each ignites the sunshine and retains it lit. If electrical present was to movement in the light bulb at total voltage, the bulb would burst, therefore the managing factor supplied by the ballast is essential for your appropriate operate of any HID light-weight. A magnetic ballast is made up of one or more aluminum or copper coils that sit on a core that is produced up of metal laminations. The coils and main function along with a capacitor, and at times an igniter. These 4 areas are most frequently crafted into your ballast casing. A electronic ballast delivers a similar energy regulate as does the magnetic ballast, but using the electronic model the existing conforms to optimum amounts of overall performance for each specific sort and wattage of lamp, probable through digital circuitry. Magnetic ballasts weigh a lot more than do electronic types, a thing to consider in the greenhouse setting, and so they also operate hotter than digital units. Thanks to the greater consistent application of electrical latest, the lamps past extended and performance in a bigger stage using considerably less ability by using a electronic ballast than they may by using a magnetic ballast. Using a digital ballast, the light developed is a lot more steady. Magnetic ballasts, particularly as they age, turn out to be far more noisy when they run, result in the HID lamps to flicker and also add to irregularities in the colour that the lamp gives off....

[2015-07-01]

Electronic ballast is the power frequency (50Hz / 60Hz) alternating current into high frequency alternating current, and can make a or a plurality of fluorescent tube normal startup and steady work of converter (ballast) basic principles: AC / DC converter, which is composed of a full bridge rectifier, and other complete, rectifier by electromagnetic interference (EMI) filter (RFI), consisting of an inductor L and a capacitor C, prevent ballast to produce harmonic feedback to input grid, suppression of pollution of power grid and the equipment interference. At the same time, stop the power grid harmonic interference into the ballast. Before the DC filter, the power factor correction (PFC) boost circuit can reduce the current harmonic distortion and improve the power factor. Composed of bipolar or MOS - FET, power transistor DC / AC inverter DC voltage converter for 20 ~ 50KHz high-frequency sine wave voltage, output network uses the LC series resonant self-excited circuit or excitation circuit....

[2015-07-01]

LED tube is also commonly known as LED light tube, LED fluorescent lamp, LED fluorescent lamp, and its light source adopts LED as the light emitting body. The traditional fluorescent tubes also known as fluorescent lamp, lamp at both ends of each of a filament, trace argon and rare mercury vapor lamp is filled, on the inner wall of the lamp tube is coated with fluorescent powder, between two filaments of gas conductive emit ultraviolet light, the fluorescent powder to emit visible light. Due to the presence of heavy metals and their compounds 0.9m, 1.2m, 1.5m, 1.8m, the tube is 2.4mLED installation is simple, the installation will take out the original fluorescent lamp for LED lamp,fluorescent light ballast and fluorescent starter removing and let the 220V AC commercial power is applied directly to the LED at both ends of the lamp tube can be led lamp energy saving up to more than 70%, life is ordinary lamp is more than 10 times (theory is can reach more than 50000 hours), almost maintenance free, there is no need to frequently replace the lamp, ballast, starter, about half a year down the cost savings can be in exchange for the cost....

[2015-06-30]

When you live in an location that has a brief expanding season, then you certainly will likely want to get a jump get started over the gardening yr by starting up seeds indoors, then rising the seedlings on beneath lights. All plants need 3 items to thrive: water, nutrition, and light. Of those three, inadequate indoor grow light is often the a single that lays waste the most effective laid gardener's programs for powerful and sturdy seedlings. Grow lights impact plant growth depending on the quantity of light they give and also the high quality from the light they emit. Indoors, under artificial conditions, you will be wanting to emulate the practical parts of natural sunlight as much as possible for optimum plant development, all other required substances staying present....