-
[2013-12-17]
Ballast ANSI: M102 (150 Watt metal halide ballast)
Full ballast replacement kit w/ starter, capacitor, core & mounting hardware
Ballast Type: Metal Halide
Power Factor: 0.90
Weight: 5.9 lbs
Full factory warranty
Ballast 4-Tap Works on: 120V, 208V, 240V or 277V
Amp Draw: 120V=1.60 208V=1.00 240V=0.80 277V=0.70
Capacitor Value: 16.0/280
Starter Used: ST1001
A 150 Watt Metal Halide Ballast, like any other electrical device, generates heat during normal operation. Excessive temperature will have an adverse effect on ballast life. Normal temperature limits for magnetic Ballasts have a maximum case temperature of 90°C. For proper installation, insure that remote ballasts are properly vented and mounted to a heat-dissipating surface. Ballasts in metallic casings must always be grounded.
150 Watt Metal Halide Ballast Kit 4T
Ballast ANSI: M102
Operating Voltage: 120V, 208V, 240V or 277V
Included: Starter, Capacitor, Core, Mounting...
-
[2013-12-16]
70 watt metal halide ballast features a 4-tap voltage input for compatibility from 120 to 277 volts. For use with 70 watt lamps, this magnetic HID ballast boasts a high power factor of 90%, ensuring maximum efficiency. A temperature rating of 212 degrees F makes the ballast suitable for mounting in warehouses and manufacturing facilities where high heat may be an issue. Includes dry capacitor, ignitor and bracket kit.
70 Watt metal halide ballast ANSI: M98 (70W metal halide)
Full ballast replacement kit w/ starter, capacitor, core & mounting hardware
Ballast Type: Pulse Start Metal Halide
Power Factor: 0.91
Weight: 4.5 lbs
Full factory warranty
Ballast 4-Tap Works on: 120V, 208V, 240V or 277V
Amp Draw: 120V=0.75 208V=.044 240V=0.38 277V=0.33
Circuit Type: HX-HPF...
-
[2013-12-16]
100 Watt Metal Halide Ballast Kit
Ballast ANSI: M90 (100W metal halide)
Full ballast replacement kit w/ starter, capacitor, core & mounting hardware
Ballast Type: Metal Halide
Power Factor: 0.94
Weight: 5.2 lbs
Full factory warranty
Ballast 4-Tap Works on: 120V, 208V, 240V or 277V
Amp Draw: 120V=1.15 208V=.066 240V=0.68 277V=0.50
Circuit Type: HX-HPF
Capacitor Value: 12.0/280
Input Volts (60 hz): 120, 208, 240, 277
Input Watts: 129, 129, 129, 129
Approx Line Current (Amps): 1.1, 0.7, 0.6, 0.5
Circuit Type: HX-HPF
ANSI: M90
Insulation Class: H
Power Factor: > 90%
Regulation:
Line Volts: ±10%
Lamp Watts: ±10%
Min. Ambient Starting Temp.: -20°F/-30°C
High Potential Test (Volts):
1 Minute: 1650
1 Second: 2000
Lead Lengths (inches): 12
UL Temperature Ratings: 1029B
Capacitor: 12.0/280v. Included in kit
Starter/Ignitor: ST1001. Included in kit
100 Watt metal halide ballast features a 4-tap voltage input for compatibility from 120 to 277 volts. For use with 100 watt lamps, this magnetic HID ballast boasts a high power factor of 90%, ensuring maximum efficiency. A temperature rating of 212 degrees F makes the ballast suitable for mounting in warehouses and manufacturing facilities where high heat may be an issue. Includes dry capacitor, ignitor and bracket kit.
100 Watt Metal Halide Ballast Kit 4T...
-
[2013-12-16]
400 Watt metal halide ballast features a 4-tap voltage input for compatibility from 120 to 277 volts. For use with 400 watt lamps, this magnetic HID ballast boasts a high power factor of 90%, ensuring maximum efficiency. A temperature rating of 212 degrees Fahrenheit makes the ballast suitable for mounting in warehouses and manufacturing facilities where high heat may be an issue. Includes dry capacitor and bracket kit.
400 Watt Metal Halide Ballast Kit Details:
Ballast Operating Voltage: 120V/208V/240V/277V 60Hz (4-Tap)
Ballast Amp Draw: 120V=4.10 208V=2.40 240V=2.04 277V=1.75
Ballast ANSI: M59 (probe start metal halide)
Ballast Wattage: 400 Watt
Ballast Type: HID Magnetic Metal Halide
Ballast Power Factor: 0.98
Ballast Circuit Type: CWA
Ballast Shipping Weight: 10.2 lbs
Full Factory Warranty: 3 Years
Capacitor Included: 24.0/400
Mounting Hardware Included
1 - 400 watt Low Heat METAL HALIDE Ballast
1 - 400 watt METAL HALIDE Capacitor
1 - Mogul Based 5KV Pulse Rated Socket with fine threaded 8/32 bolts
5 - High Temperature Wire Connectors
EASY TO UNDERSTAND WIRING INSTRUCTIONS INCLUDED!...
-
[2013-12-15]
Product Materials and Features :Case is made of aluminium alloy through die casting, its surface is treated with electrostatic spraying, reflector is made of high pure aluminium and has symmetry light distribution.
High temperature resistant silicon rubber sealing belt, 5mm toughened glass, pot galvanized bracket, stainless steel agraffe.
Reflector is made of high-pure aluminium and has two ways of light distribution, i. E. Symmetry and asymmetry
Metal halide flood light fixtures adapts domestic new-style aluminium alloy, reasonable structure and easy maintenance.
Metal halide flood light fixtures and electric equipment have intergrated structure.
Place to be used: Luminaire can be used at dock, billboard, square, playground, high building, park, container field and so on.
Metal Halide lamps produce a stunning output for the compact nature of the product.The lamp is small in comparison to incandescent and fluorescent alternatives, producing the same light output.Variety of wattages available, making it highly versatile for a number of different application from lighting up a back garden to an entire football pitch.Easy to install for qualified electricians and require little maintenance.Colour washing easily achieved thanks to wide range of different coloured lamps.All fittings weatherproof (unless stated otherwise).Tough die cast construction....
-
[2013-12-15]
Metal-halide lamps have high luminous efficacy of around 75 - 100 lumens per watt,which is about twice that of mercury vapor lights and 3 to 5 times that of incandescent lights.[1] Lamp life is 6,000 to 15,000 hours.and produce an intense white light. As one of the most efficient sources of high CRI white light, metal halides are the fastest growing segment of the lighting industry.
Metal Halide floodlights are a part of the HID (high intensity discharge) group of lamps and produce a fantastic output for the size of the lamp. The light produced is blue-white in colour and provides excellent colour rendering, ideal for use domestically, industrially and perfect for using with CCTV cameras and other recording equipment.
metal halide outdoor flood light 250w-400w-1000w 1. High brightness with good heat sink
2. Easy installation and maintenance 3.Tempered glass: heat-proof, crash-proof 4.Reflector in pure aluminum 5.Steel bracket 6.Stainless steel external nuts and screws 7.Heat-resistant silicon rubber seal ring 8.Available in Class I, IP65 9.Input Voltage: 200-240V/50Hz/60Hz10.Max Watt:400w, 11.Lamp:MH400W/E40,HPS400W/E40,12.Die casting Aluminum Body 13.Application:Stage, Advertising Board, Gym, Stadium, Yard, Lawn, Garden, Park, Plaza,Shopping Mall, Exhibition Hall,Dock, Highway Toll Station etc
This type of lamp was originally created in the 1960s for use in the industrial sector and now are available in a wide variety of wattages and different fittings to suit all types of applications....
-
[2013-12-14]
High pressure lamps are small than the alternative low pressure version and these are higher in mercury content which results in a dark pink glow when first lit and turns into a warm orange/pink colour when fully illuminated. In this version of lamp, the main source of light comes from the sodium D-line.
These high pressure versions are most popular amongst councils for car parks and street lighting, with another popular source being indoor gardening set-ups.
Standard 250 and 400 watt sodium floodlights are also available, coming complete with a 10,000 hour, 28,000/50,000 lumen sodium lamp. The included asymmetrical reflector ensures an even distribution of light without causing light pollution. Photocells are also available for the floodlights, allowing dusk to dawn operation.
INTENDED USE
Provides focused illumination for outdoor use in residential and light commercial applications. Ideal for walkways, yards, patios, play areas and driveways creating an inviting exterior space as well as providing safety and security. Eave or wall mount only.
ATTRIBUTES
Rugged, weather and rust resistant die-cast aluminum housing in a bronze finish and tempered glass lens door frame. Hinged door frame and snap on/off latches provide for easy tool-free re-lamping.
Starts instantly down to -40°F (-40°C).
Includes (1) 70W high pressure sodium (HPS) medium lamp holder.
All mounting hardware included....
-
[2013-12-14]
High pressure sodium floodlights, which is a possible point in all directions uniformly illuminated light, it illuminated area can be adjusted, the performance of a regular octahedron icon in the scene. Floodlights in effect, making them one of the most widely used light source, standard floodlights used to illuminate the entire scene. Scenario can be applied to multiple floodlights. To produce better results will be taken into a large reflective umbrella with a light bulb for the light source for the proliferation of the use of high brightness. Although the studio lighting are essential, but for the average amateur indoor photography, can also be regarded as a good source of lighting effects
The HPS floodlights body material is aluminum alloy die casting surface treatment electrostatic spray coating temperature, anti-acid, anti-aging light body with light electrical integration design, compact structure, small reflector applications imported high purity aluminum, a variety of reflective surface design, with light to form a variety of different needs, high luminous efficiency, glare small light source can be customized according to customer needs, you can use the single-ended or double-ended metal halide or high pressure sodium lamp using lamp holder E40 or RX7s mask is 5mm tempered glass, safe, high temperature, high strength, good transparency silicone rubber sealing strip of corrosion seals, sealing, waterproof, dustproof application of high performance ballast, ignitor and capacitor, to ensure that lighting electrical performance requirements in line with GB internal cables 1mm2PVC applied markers, stadiums, squares, trees, billboards, parking lots, building facades, etc....
-
[2013-12-12]
1, The radiator lamps used :
Heat lamp bead determines the speed of the entire lamp lumen degree and life. Lamp beads work long hours under high temperature , the light fades quickly, life is very short , and the brightness ceiling too bad , would not achieve the effect of accent lighting .
LED Ceiling radiator scheme , the mainstream approach with integral heat sink with a heat lamp beads single column mode , there are additional fan cooling methods.Size of the radiator , the quality of the aluminum material affects the rate of cooling , but also affect the price of the whole lamp .
2, to see the lamp power ( commonly known as the transformer ) :
Transformers also determines the quality of life of the whole lamp , lamp beads used for more than 50,000 hours no problem, but if the transformer is broken , it can not afford the whole lamp will light up . The transformers used in electronic components, the design determines the efficiency of the transformer, power factor , stability, temperature rise , life.
Users do not understand the components of knowledge , it can be judged from the initial size of the transformer , weight, and electrolytic capacitors, consult the manufacturer 's terms of use . LED Ceiling price differences , quality of the transformer is not a small proportion .
3 , to understand lamp beads brand and packaging :
Lamp beads key factor in determining the quality of LED ceiling lighting , packaging technology affect the quality of lamp beads , heat and so on. U.S. chip chip lamp beads , Taiwan chip , homemade chips. Different brands, the price difference is large, the lighting effects are also great differences .
Users can learn by way of consultation with the manufacturer lamp beads programs , depending on the degree of integrity of manufacturers . Price particularly low ceiling , using chip production lines and lay a lot of defective products to produce, inconsistent color temperature , brightness difference , short life, users need to pay attention ....
-
[2013-12-12]
1, LED fluorescent lamp constant power
Determine the characteristics of the semiconductor LED influenced by the environment , such as temperature , LED current will increase ; voltage increases, the LED current will increase. Long-term than the rated current work , will greatly shorten the LED life. The LED is constant when changing environmental factors such as temperature and voltage , constant current to ensure that their work .
2, LED fluorescent lamp power to how we can match the light board ?
Some customers to design light board , find the power , find it difficult to have a proper power supply, or too much current , the voltage is too small ( eg I> 350mA, V <40V); either current is too small , the voltage is too high ( eg I < 40mA, V> 180V), resulting in a severe fever , inefficient , or the input voltage range is not enough. In fact , choose a string and pick the best way , plus the voltage and current on each LED is the same, but the effect of the power supply was able to play the best performance. The best way is to communicate and power supply manufacturers , tailored.
3, LED fluorescent lamp power supply current is how much work is the most appropriate?
General LED rated operating current 20 mA , and some plants used to make the outset , design 20 mA , in fact, this current work under very severe fever , after numerous comparison test , designed to be 17 to 19 mA is relatively ideal design for the recommended 18 mA....
EMAIL US
SKYPE